You can have the Powercab 112 set "Flat" to reproduce exactly the tone of your amp-sim/cabinet software. (This is also the mode for playing along with backing tracks through them). Or bypass your cabinet model and choose between six different speaker emulations. Instantly, you can play through speaker models with evocative names like: Vintage (30s), Bayou (Swamp Thang), Green(back), Cream(back), Jarvis (P12Q), and Blue (Bell).

Both the Powercab 112 and the 112 Plus each have identical 12-inch coaxial speakers fitted with 1-inch high frequency compression drivers. Line 6 uses a 250-watt (peak) power amplifier to produce up to 125dB SPL from these cabinets. Line 6 developed these models for the original speaker drivers independently of the cabinet they are normally heard in so it is as if you had bolted in a different driver into the same cabinet.

The Line 6 Powercab 112 cabinets each measure 567 X 462 X 305 mm or 22.3 W X 18.2 H X 12-inches D and weigh about 35-lbs. The cabinets are made from curved plywood and come with rear-mounted "kick-stands" for tilting the cab upwards to fill the room or for aiming them back at you for stage monitoring.

Sonically identical, the Powercab 112 Plus differs from the 112 with the addition of Line 6's L6 Link™/AES/EBU digital I/O; MIDI I/O; stereo USB audio interface (for loading impulse responses and editing); and the ability to store, recall and use 128 third-party impulse responses for more speaker emulations.